Front & Tank

K-SPEED Cover FrontShock decorated for Honda Super Cub C125 (Short version)

The tape is attached with a special 3M tape. When installing, wipe off any oil with a cleaner and pre-treat with a primer to ensure strong adhesion. Because it is a special adhesive, it can be removed with little damage to the vehicle.

★Easy to install, even for beginners

K-SPEED Cover Front Shock decorated for Honda Super Cub C125 (pastel blue 2024)Products made from ABS plastic

The tape is attached with a special 3M tape. When installing, wipe off any oil with a cleaner and pre-treat with a primer to ensure strong adhesion. Because it is a special adhesive, it can be removed with little damage to the vehicle.

★Easy to install, even for beginners

K-SPEED RB0193
K-SPEED Tank Cover For HONDA Rebel 250, 300 & 500
Diabolus Fuel Tank Cover (Model without holes )
★Easy to install, even for beginners

[Parts compatible with the 2023 new CT125] (JA65, JA55)
K-SPEED CT96J-white front fender for CT125 (JA65, JA55) Diabolus
K-SPEED Front Fender Red For HONDA CT125

Color: yellow Color: white

★★Screws and a screwdriver are required. For intermediate users.

Note: Move the brake line bracket to the same location as the reflector bracket.

Front fender long type
K-SPEED CT98J-Front fender white long type CT125 (JA65, JA55) Diabolus
[Parts compatible with the 2023 new CT125] (JA65, JA55)
K-SPEED CT92J
K-SPEED Front Fender for Honda CT125

★★Screws and a screwdriver are required. For intermediate users.

Note: "Move the brake line bracket to the same location as the reflector bracket."

K-SPEED CA18
K-SPEED CA18-SHNY BLACK (glossy) front shock cover
Black (glossy)

The tape is attached using a special 3M tape. Before installation, wipe off any oil with a cleaner and apply a primer to ensure a strong adhesive. Because it is a special adhesive, it can be removed with minimal damage to the vehicle.

★Easy to install, even for beginners

Front fender long type

[Parts compatible with the 2023 new CT125] (JA65, JA55)
K-SPEED CT92J
K-SPEED Front Fender for Honda CT125

★★Screws and a screwdriver are required. For intermediate users.

Note: "Move the brake line bracket to the same location as the reflector bracket."

K-SPEED CT94

K-SPEED Tank Case & Center Carrier Set for Honda CT125

Recommended combination with this part: This part can be installed on the original seat, but in that case, it will not look like the picture. We recommend the K-SPEED seat .
When refueling, remove the dummy tank.

★★Screws and a screwdriver are required. For intermediate users.

Compatible parts for new CT125 released in 2023
K-SPEED-CT87-Yellow
K-SPEED Diablo Front Fender Red For HONDA CT125

Color: Yellow

< For Intermediate >

K-SPEED-DX049J Front and rear stainless Fender For HONDA Dax1255

< For Intermediate >

K-SPEED-CL06
K-SPEED-CL06 Tank cover CL250, 300 & 500

Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED-CL03
K-SPEED Radiator Cover For CL300 & 500

Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED-RB0166

K-SPEED Radiator Cover With Black Line For  Rebel 250, 300 & 500 YEAR 2016～

< For Intermediate >

Please note that the suspension will be shipped by sea, so it will take approximately one month to Japan and Europe, and three months to the United States.

K-SPEED DX004J
K-SPEED Super Low Rear Shock Absorbers For HONDA Dax125(285MM)

The side stand is a Thai specification and does not have a hole for the sensor.
Please use the sensor with it turned off, or if you are using the sensor, make a hole in it before use.

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED-CT72-Gray
K-SPEED Front Fender Gray For HONDA CT125 year 2023

Color: Gray

< For Intermediate >

Please note that the suspension will be shipped by sea, so it will take approximately one month to Japan and Europe, and three months to the United States.

K-SPEED DX035J-2
K-SPEED Super Low Rear Shock Absorbers size 285mm & Front Falk Set For HONDA Dax125
Improved version with added sensor hole on side stand

★★★It is safer to ask an advanced technician or engineer.

K-SPEED-DX022
K-SPEED Diablo Raised Front Fender Matt Black For HONDA Dax125

This part is "Black".  "Gray/Grey " is K-SPEED-DX021.

< For Intermediate >

K-SPEED-DX021
K-SPEED Diablo Raised Front Fender Grey For HONDA Dax125

This part is "Gray/Grey".  "Black" is K-SPEED-DX022

< For Intermediate >

K-SPEED-DX019
K-SPEED Diablo Front Fender Grey For HONDA Dax125

This part is "Gray/Grey".  "Black" is K-SPEED-DX014.

< For Intermediate >

K-SPEED-DX014
K-SPEED Diablo Front Fender Black For HONDA Dax125

This part is "Black".  "Gray" is K-SPEED-DX019.

< For Intermediate >

Compatible parts for new CT125 released in 2023
K-SPEED-CT59-MB
K-SPEED Diablo Front Fender Matte Brown For HONDA CT125

Color: Matte Brown

< For Intermediate >

Compatible parts for new CT125 released in 2023
K-SPEED-CT59-LG 
K-SPEED Diablo Front Fender Light Green For HONDA CT125

Color: Light Green

< For Intermediate >

Compatible parts for new CT125 released in 2023
K-SPEED-CT59-RED 
K-SPEED Diablo Front Fender Red For HONDA CT125

Color: Red

< For Intermediate >

K-SPEED-CA18-gray blue
K-SPEED Front Shock Cover For HONDA C125 YEAR 2018-.
Colour: ‘Grey blue’.

Installation is done with special tape made by 3M.
When installing, wipe off oil with a cleaner and primer to ensure a strong adhesion.
The tape sticks strongly. The special adhesive allows the tape to be removed with little damage to the car body when peeled off.
Easy to install, even for beginners.