K-SPEED (Official Web site K-SPEED Japan )

K-SPEED RB0030
K-SPEED Dual Exhaust Long For Honda Rebel (CMX) 500
2017+
For the Honda Rebel 500 (CMX500), from its initial release in 2017 up to the current model, there have been no changes in the pipe diameter (size) of the exhaust pipe itself across different model years.
**Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED RB0087J
K-SPEED Tank Cover For Honda Rebel (CMX) 250, 300 & 500

 

Recommended in combination with this part:
RB0089 Side Cover
RB0084 Under Cowl
RB0163 Radiator Cover

★Easy to install - even for beginners

K-SPEED RB0084e
 [E-Clutch 2025 Model Compatible]
K-SPEED Fairing Under Cowl (Pan Panel) For Honda Rebel (CMX)500
Rebel 500/500S 2016+　
This part is for Rebel 500cc.

*The aluminum heat-resistant sheet inside the cover will deteriorate over time due to heat. If the surface is burned, deteriorated, or damaged, please repair it by replacing it with a commercially available heat-resistant sheet.Recommended combinations with this part:

RB0087 Tank Cover　
RB0089 Side Cover
RB0163 Radiator Cover
RB0086 Tail Light

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED RB0014J
K-SPEED Tail Light For Honda Rebel (CMX) 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
ALL Model

★★★It is safer to ask an advanced user or an engineer.

Product wiring mode:
1. Black wire connects to cathode
2. White wire connects to taillight
3. Red wire connects to brake light
4. Green wire connects to left turn signal
5. Yellow wire connects to right turn signal

A separate turn signal LED relay is required.

Recommended IC Turn Signal Relays

• POSH Faith: Wide Watt Turn Signal Relay This is the most recommended manufacturer. They offer coupler-on types specifically designed for Honda vehicles, allowing for secure installation without modifying the genuine harness.

• DAYTONA: LED Compatible Turn Signal Relay This product has a proven track record of being used in many custom vehicles and is highly regarded for its stable operation. It can maintain accurate flashing cycles without losing original functions like hazard lights.

Recommended
Products purchased together
Turn signals, license plate brackets

K-SPEED RB0198e undercowl for Honda Rebel (CMX) 250/300 E-Clutch 2025 Diabolus
 [Compatible with E-Clutch 2025 models] 8BK-MC49
Undercowl

Recommended combination with this part: RB0039 
**Screws, screwdrivers, etc. are required. For intermediate users.

 

K-SPEED RB0010e [Compatible with 2025 E-Clutch models]

*The aluminum heat-resistant sheet on the inside of the cover will deteriorate over time due to heat. If the surface is burned or shows signs of deterioration or damage, please replace it with a commercially available heat-resistant sheet and repair it.

Rebel 500/500S
2017,2019,2020,2023,2024,2025

K-SPEED Fairing Under Cowl (Pan Panel) For Honda Rebel (CMX) 500

This product cannot be used with the Rebel 1100.


★★Screws, screwdrivers, etc. are required. For intermediate users.

We are offering a great deal on a popular 3-item set.

	2025-	-2024
Handlebar	RB0203	RB0027
Handle Grips	RB0202	RB0037
Bar End Mirror	RB0097	RB0097

Sale Price: 10% off

K-SPEED RB0083
K-SPEED Front and Rear Wheels Cover Set For Honda Rebel (CMX) 250, 300 & 500

★★★We recommend having this installed by an advanced user or engineer for peace of mind.

K-SPEED DX058J
K-SPEED DX058J Exhaust Short Style Honda DAX125 (ST125 DAX) Diabolus

★★Screws, screwdrivers, etc. are required. For intermediate users.

Please note that the suspension will be shipped by sea, so it will take approximately 1 month for Japan and Europe, and 3 months for the US.

K-SPEED DX035J-2
K-SPEED Super Low Rear Shock Absorbers size 285mm & Front Fork Set For Honda DAX125 (ST125 DAX)
Improved version with a hole for the sensor added to the side stand

★★★It is safer to ask an experienced professional or engineer.

K-SPEED DX071J Seat for Honda DAX125 (ST125 DAX) Diabolus

Note:
We use screws with sufficient strength.
Applying too much force during installation will cause damage.
Please install with a torque wrench at 22 Nm or less.
Screw breakage or damage during installation is not covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED DX023J
K-SPEED Seat Super Low With Diamond Pattern For Honda DAX125 (ST125 DAX)

No modifications are necessary, and installation is smooth.
Although it is waterproofed, the product has seams. If you require perfect waterproofing, please apply seam sealer to the seams or use a waterproof cover.

★Easy to install - even for beginners

Caution
Please use screws with sufficient strength.
Applying too much force during installation will break it.
Please install with a torque wrench set to 22nm or less.
Breakage of screws or damage during installation will not be covered under warranty for any reason.
Please purchase with this understanding.

K-SPEED GT02
K-SPEED Exhaust For Royal Enfield GT650 & Interceptor650

Cannot be used with the stock compact engine guard.

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED GT16
K-SPEED Side Pocket Cover For Royal Enfield GT650 & Interceptor650

★Easy to install - even for beginners

K-SPEED GT56
K-SPEED Seat Short Café Racer For Royal Enfield GT650 & Interceptor650
approx. 61cm X 25cm
★Easy to install - even for beginners

News

K-SPEED HT-SSF Cafe Seat & Subframe for Royal Enfield Hunter 350

Recommended
Items often purchased together
Tail lights, turn signals, license plate brackets

K-SPEED CT44J
K-SPEED Seat With Lattice Pattern For Honda CT125 (Trail125) (JA65, JA55)
Approximately 20mm lower than the genuine seat.

This is a firm, ultra-thin seat designed for better foot reach. The front part is narrowed to improve foot reach.

★Easy to install - even for beginners

The model number of this product has changed. (Old CT-JP8)

Note
The screws used are of sufficient strength.
If too much force is applied during installation, it will break.
Please install with a torque wrench at 22nm or less.
Screw breakage or damage during installation will not be covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED CT124J Semi-Long Seat for Honda CT125 Hunter Cub (Trail125) (JA65, JA55) Diabolus

• Sophisticated Square Pattern Design: Enhances the rear view with a custom feel without compromising the vehicle's silhouette.

• 4cm Longer than Stock & Slim Design: By making the seat narrower and extending the length by a total of 4cm front and back, it significantly increases freedom in seating position.

• Ideal for Taller Riders: The expanded seat space eliminates cramped positions, ensuring a comfortable posture even on long rides.

★Easy to install – even for beginners

 

Note
The screws used are of sufficient strength.
Applying too much force during installation may cause damage.
Please install with a torque wrench at 22nm or less.
Screw breakage or scratches during installation are not covered by warranty for any reason.
Please be aware of this before purchasing.

K-SPEED CT115J Big Headlight cover wind shield for Honda CT125 (Trail125) Diabolus

 

★Easy to install, even for beginners

K-SPEED CT73 (JA65, JA55)
K-SPEED Rear Carrier Rack with original toolbox For Honda CT125 (Trail125)
This is an improved version of the CT17 with an added stay that allows you to attach the stock toolbox.

Recommended combination with this part: CT57 Air Filter Cover

★★Screws, screwdrivers, etc. are required. For intermediate users.

Compatible Passenger Seats
K-SPEED CT74 PASSENGER SEAT (DIAMOND PATTERN)
https://k-speed.com/collections/rear/products/ct74
K-SPEED CT75 PASSENGER SEAT (SQUARE PATTERN)
https://k-speed.com/collections/rear/products/ct75
K-SPEED CT76 PASSENGER SEAT (STRAIGHT PATTERN)
https://k-speed.com/collections/rear/products/ct76

K-SPEED RS03 Custom Seat For KAWASAKI Z900RS Diabolus

**Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED KE05 Front Light Cover Set for Kawasaki Eliminator 400/450/500 year 2023- Diabolus

★★Requires screws, screwdriver, etc. For intermediate users.

K-Speed KE04 custom seat for Kawasaki Eliminator 400/450/500 
Eliminator Seat

★★Requires screws, screwdriver, etc. Intended for intermediate users.
CAUTION
Screws with sufficient strength are used.
Applying too much force during installation will cause damage.
Install with a torque wrench at 22nm or less.
Screw breakage or damage during installation is not covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED KE06 Front Light Cover for Kawasaki Eliminator 400/450/500 year 2023-
Diabolus

★★Requires screws, screwdrivers, etc. Intended for intermediate users.

K-SPEED HM042 Super Low Seat for Honda Monkey125 Diabolus

K-SPEED HM037J-BLACK Big Headlight cover wind shield for Honda Monkey 125 Diabolus

 

★Easy to install - even for beginners

K-SPEED HM026 Seat (Square pattern) for Honda Monkey 125

K-SPEED HM021 Retro Full System for Honda Monkey 125

This exhaust system does not include an O2 sensor.

K-SPEED GB02 Full System for Honda GB350C Diabolus

K-SPEED GB08 Crash Bars for Honda GB350, GB350S, GB350C Diabolus

K-SPEED GB020 Custom seat for Honda GB350 (Only) Diabolus

GB350      ○
GB350C 　 ×
GB350S　　×

K-SPEED GB019 brown seat for Honda GB350C Diabolus

GB350      ×
GB350C    ○
GB350S　　×

K-SPEED SX12 silver color Scrambler style for Triumph Scrambler 400X Diabolus

Diabolus Full System exhaust pipe silver color Scrambler style for Triumph Scrambler 400X
(For 1-hole O2 sensor)

K-SPEED SX19 Seat (mixed styles) for Triumph Speed400 & Scrambler 400X Diabolus
The seat is approximately 2cm thinner than the original seat.
This may vary depending on weight distribution and individual seat variations.

K-SPEED SX14 Tail Tidy with LED license plate light for Triumph Scrambler 400x/400xc & Speed400 Diabolus

K-SPEED SX09 Crash Bars for Triumph Scrambler 400 & Speed 400 Diabolus

K-SPEED CL34J Retro Scrambler Slip on exhaust for Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL12 Front Fender (high-rise) For Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.
Products made from ABS plastic

K-SPEED CL29 Crash Bars for Honda CL500

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL23 Wheel Frame Sliders for Honda CL 500

★Easy to install - even for beginners

K-SPEED YAMAHA PG-1 Rock Scrambler
This product is available for pre-order.

*Important Request
For those considering or wishing to purchase this complete vehicle,
please contact us via the inquiry form.
We would like to explain the stock status, shipping details, various expenses at dealerships, payment methods, etc., before proceeding.

Honda CT125 (Trail125) Hunter Custom By K-SPEED

*Request
For this complete motorcycle, those considering or wishing to purchase it, please contact us via the inquiry form.
We would like to explain the stock status, delivery details, miscellaneous expenses at the dealership, payment methods, etc., before proceeding.

Inquiry Form

Introducing the brand new custom "Puppy Racer" based on the Honda DAX125 (ST125 DAX)!!
It features K-SPEED's signature beautiful finish.
*ABS has been removed due to the custom specifications. Due to this, the indicator lamp on the meter may remain on.

*Please be sure to read the "Notes" before purchasing.

■About the displayed price for Full Custom (Complete Build-Up)

	Full Custom
Included in the displayed price	Shipping fee (shipping fee to the dealership)
Not included in the displayed price	Compulsory automobile liability insurance premium
	Option fees Oil Battery Consumption tax Miscellaneous expenses set by the dealership

 

*1 For the Honda DAX125 (ST125 DAX) license plate, we will issue a sales certificate, and you are responsible for obtaining it yourself at your local government office. In countries other than Japan, please obtain the license plate and register all vehicles yourself in accordance with the laws of each country.

• *2 In countries other than Japan, additional costs may be incurred due to local laws and regulations. Please contact us.
• *3 For consultations regarding optional parts installation and estimates for the total cost, please contact us. Please note that in countries other than Japan, optional parts may not be installed due to local laws and regulations.

※Specifications may change without notice from the photos. Please be aware of this in advance.

The mirror shown in the 5th image will be installed.

K-SPEED Triumph 400 Diabolus Tracker
Complete bike sales (Note: parts kits are not sold)
Shipping included (to international port)
Customs clearance fees and domestic shipping costs are not included.
Delivery may not be possible in some countries. (Japan and USA are not importable.)
Oil and battery are not included.
License plate acquisition must comply with the laws and regulations of each country. License plate acquisition is the responsibility of the purchaser.
Please inquire in advance before purchasing.
Specifications are subject to change without notice due to supply and improvements.
If there are significant changes to the appearance, we will notify you.