CT125 / Trail125 / HUNTER CUB

The K-SPEED CT044J is an extra-thin seat for the Honda CT125 (Trail125), model codes JA65 and JA55. It has a lattice-pattern design, is about 20 mm lower than the stock seat, and is a firm seat focused on ground reach. Compatible Models: - Honda CT125 (Trail125) - Model codes: JA65, JA55 Key Features: - Lattice-pattern seat design - Extra-thin design, about 20 mm lower than the stock seat - Firm seat focused on better ground reach - The front of the seat is slimmed down for easier footing - Beginner-friendly installation Product Code: - Old product code: CT-JP8 / Current product code: CT044J Installation: - Use screws with sufficient strength - Do not apply excessive force during installation - Use a torque wrench and tighten to 22 Nm or less Important Notes: Broken screws during installation and scratches caused during installation are not covered by the warranty, regardless of the reason. Please purchase with these notes in mind. Before You Order: Please check that your bike's model code is JA65 or JA55.

The K-SPEED CT73 is a rear carrier rack for the Honda CT125 (Trail125), model codes JA65 and JA55. It is an improved version with added brackets so that the stock toolbox can be mounted, and it combines the rear rack with a dedicated toolbox. Compatible Models: - Honda CT125 (Trail125) - Model codes: JA65, JA55 Key Features: - Rear carrier rack with dedicated toolbox - Improved version with added brackets so the stock toolbox can be mounted on the CT17 - Compatible passenger seats: K-SPEED CT74 (DIAMOND PATTERN), CT75 (SQUARE PATTERN), CT76 (STRAIGHT PATTERN) Installation: - Requires tools such as screws and a screwdriver - Intermediate-level installation Recommended Combinations: - CT57 Air Filter Cover Before You Order: Please check that your bike's model and model code match the compatibility conditions above.

The K-SPEED CT094J is a tank-shaped case and center carrier set for the Honda CT125 Hunter Cub (Trail125), model codes JA65 and JA55. Compatible Models: - Honda CT125 Hunter Cub (Trail125) - Model codes: JA65, JA55 Set Includes: - Tank-shaped case - Center carrier Usage Notes: - The case can also be installed with the stock seat, but the look will not be the same as in the product photos. We recommend pairing it with a K-SPEED seat - Remove the dummy tank when refueling Installation: - Requires tools such as screws and a screwdriver - Intermediate-level installation Before You Order: Please check that your bike's model and model code match the compatibility conditions above.

The K-SPEED CT114J is a windshield for the Honda CT125 Hunter Cub.

【Compatible Models】
・Honda CT125 Hunter Cub

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT114J Big Headlight cover wind shield for Honda CT 125 Diabolus

【Installation】
Easy to install. Can be installed even by beginners.

【Before Ordering】
Please ensure that your vehicle's model, engine displacement, and model year meet the compatibility requirements before placing your order.

The K-SPEED CT086J is an exhaust for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT86J Retro Scrambler Exhaust for Honda CT125 (Trail125) (JA65, JA55). This K-SPEED JAPAN edition features a silencer adjusted for Japanese residential environments. It can be installed on both JA65 and JA55 models without any issues. The main body of this product is coated with ceramic heat-resistant paint (up to 700°C). Please be aware that there are counterfeit products and parallel imports being sold with inferior paint. Please exercise caution with online auctions or products labeled as "imported authentic," as these are often parallel imports which frequently cause issues. There are cases where counterfeit products or models intended for overseas markets are included in sales. Products that are not genuine K-SPEED JAPAN goods are not covered by warranty.

【Installation】
Tools such as screws and screwdrivers are required. Installation is intended for intermediate users.

【Before Ordering】
Please ensure that your vehicle's model, engine displacement, and year of manufacture meet the compatibility requirements before placing your order.

K-SPEED CT71J (JA55 JA65)
K-SPEED Crash Bars For Honda CT125 (Trail125)

The rugged, edgy, military-inspired design dramatically enhances the "trail" and "toughness" of your Hunter Cub just by installing it. This is the perfect item for those who want to increase the volume of their vehicle and create a wilder off-road style.

In the event of a fall, it also has the practical function of reducing damage to the engine area and exterior. It is compatible with both new and old models (JA55 / JA65), so you can choose with confidence.

【Features】

• Overwhelming Presence: A matte black finish that sharpens the vehicle's appearance and Diabolus' unique sophisticated yet rugged design.

• High Practicality: In addition to protecting the vehicle in the event of a fall, it can also be used as a base for additional customization such as fog lights, action cameras, and bags.

• Bolt-on Design: Compatible with both JA55 and JA65 models, it matches your beloved bike without disrupting its silhouette.

Recommended combinations with this part:
K-SPEED CT14 Headlight Cover、
K-SPEED CT57 Air Filter Cover、
K-SPEED CT00 Chain Cover、
K-SPEED CT40 Center Carrier、
K-SPEED CT39 Rear Carrier

★★Screws and a screwdriver are required. For intermediate users.

The K-SPEED CT124J is a seat designed for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
Sophisticated square-pattern design: Enhances the rear view with a custom look while maintaining the vehicle's original silhouette. 4cm longer and slimmer than stock: By narrowing the seat width while extending the total length by 4cm, the freedom of seating position is significantly increased. Ideal for taller riders: The expanded seat space eliminates cramped positioning, ensuring comfort even on long rides. Note: We use high-strength screws. Please do not overtighten during installation, as this may cause damage. Tighten with a torque wrench to 22Nm or less. Screws breaking or scratches caused during installation are not covered under warranty for any reason. Please understand this before purchasing.

【Installation】
Easy to install. Beginners can install it as well.

【Before Ordering】
Please confirm that your vehicle's model, displacement, and year meet the compatibility requirements before placing your order.

K-SPEED CT113J is a custom part for the Honda CT125 Hunter Cub (Trail125) (JA65 JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65 JA55)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT113J (JA55 JA65) K-SPEED Crash Bars For Honda CT125 (Trail125) Recommended to be paired with: K-SPEED CT14 Headlight Cover, K-SPEED CT57 Air Filter Cover, K-SPEED CT00 Chain Cover, K-SPEED CT40 Center Carrier, K-SPEED CT39 Rear Carrier

【Installation】
Tools such as screws and a screwdriver are required. Installation is intended for intermediate users.

【Before Ordering】
Please ensure that your vehicle's model, engine displacement, and year match the compatibility requirements before placing your order.

The K-SPEED CT115J is a windshield for the Honda CT125 (Trail125).

【Compatible Models】
・Honda CT125 (Trail125)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT115J Big Headlight cover wind shield for Honda CT125 (Trail125) Diabolus

【Installation】
Easy to install. Can be installed by beginners.

【Before You Order】
Please confirm that your vehicle's model, engine displacement, and year match the compatibility requirements before placing your order.

The K-SPEED CT103J is an exhaust for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT86J Exhaust Retro Scrambler For Honda CT125 (Trail125) (JA65, JA55). K-SPEED JAPAN. Can be installed on both JA65 and JA55 models without any issues. The main body of this product is coated with ceramic heat-resistant paint (up to 700°C). Please be aware that there are cases where counterfeit or parallel-imported products are sold using low-quality paint. Please exercise caution with auctions or listings marked as "imported authentic products," as these are parallel imports and are frequently associated with issues. Some cases involve counterfeit products or versions intended for overseas markets being sold. Products other than those from K-SPEED JAPAN are not covered by the warranty.

【Installation】
Tools such as screws and a screwdriver are required. Installation is intended for intermediate-level users.

【Before Ordering】
Please confirm that your vehicle's model, displacement, and year match the compatibility requirements before placing your order.

【Compatible parts for 2023 Honda CT125 (Trail125) models】
(JA65, JA55) K-SPEED CT40J K-SPEED Center Carrier For Honda CT125 (Trail125) Recommended combinations with this part: K-SPEED CT57 Air Filter, K-SPEED CT38 Crash Bar, K-SPEED-CT-JP00 Chain Cover, K-SPEED CT39 Rear Carrier ★★Tools such as screws and a screwdriver are required. Intended for intermediate users.

【Regarding Installation】
Tools such as screws and a screwdriver are required. The installation process is intended for intermediate users.

【Before Ordering】
Please ensure that your vehicle's model, engine displacement, and model year meet the compatibility requirements before placing your order.

The K-SPEED CT061J is a seat designed for the Honda CT125 (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
(JA65, JA55) K-SPEED CT61J K-SPEED Brown Vintage Seat For Honda CT125 (Trail125) Note: The screws used have sufficient strength. Applying excessive force during installation may cause damage. Please install using a torque wrench at 22nm or less. For any reason, screw breakage or scratches during installation are not covered by the warranty. Please understand this before purchasing.

【About Installation】
Easy to install. Beginners can also perform the installation.

【Confirmation Before Ordering】
Before ordering, please ensure that your vehicle's model, engine displacement, and year of manufacture meet the compatibility requirements.

【2023 New Honda CT125 (Trail125) Compatible Parts】
(JA65, JA55) K-SPEED CT116J-gray Front Fender for Honda CT125 (Trail125) (JA65, JA55) Diabolus ★★Screws, a screwdriver, etc., are required. For intermediate users. Note: "Relocate the brake line bracket to the same position as the reflector bracket."

【About Installation】
Tools such as screws and a screwdriver are required. The installation process is for intermediate users.

【Confirmation Before Ordering】
Before placing your order, please ensure that your vehicle's model, engine displacement, and model year meet the compatibility requirements.

The K-SPEED CT072 is an up-fender (front fender) designed for the Honda CT125 (Trail125) 2023 model and later.

【Compatible Models】
・Honda CT125 (Trail125) 2023 model and later

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT72-Gray K-SPEED Front Fender Gray For Honda CT125 (Trail125) year 2023 Color: Gray Note: "The brake line bracket is moved to the same location as the reflector bracket."

【Installation】
Tools such as screws and a screwdriver are required. Installation is intended for intermediate users.

【Before Ordering】
Please confirm that your vehicle's model, engine displacement, and year of manufacture meet the compatibility requirements before placing your order.

【2023 New Honda CT125 (Trail125) Compatible Parts】
(JA65, JA55) K-SPEED CT59-LG K-SPEED Front Fender Light Green For Honda CT125 (Trail125) Color: Light Green ★★Screws, screwdrivers, etc. are required. For intermediate users. Note: "Relocate the brake line bracket to the same position as the reflector bracket."

【About Installation】
Tools such as screws and screwdrivers are required. The installation process is for intermediate users.

【Before Placing an Order】
Please ensure that your vehicle's model, engine displacement, and year of manufacture meet the compatibility requirements before placing an order.

【2023 New Honda CT125 (Trail125) Compatible Parts】
(JA65, JA55) K-SPEED CT57 K-SPEED Air Filter Cover V2 For Honda CT125 (Trail125) Recommended combinations with this part: K-SPEED CT14 Headlight Cover, K-SPEED CT38 Crash Bar, K-SPEED CT00 Chain Cover, K-SPEED CT40 Center Carrier, K-SPEED CT39 Rear Carrier ★Easy to install - Suitable for beginners

【Installation】
Easy to install. Suitable for beginners.

【Before Ordering】
Please confirm that your vehicle's model, displacement, and year match the compatibility requirements before placing your order.

The K-SPEED CT030 is a headlight for the Honda CT125 (Trail125).

【Compatible Models】
・Honda CT125 (Trail125)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT30K-SPEED Headlight Cover For Honda CT125 (Trail125) The price for this product will be revised on April 1, 2021.

【Installation】
Easy to install. Can be installed by beginners.

【Before Ordering】
Please verify that your vehicle's model, engine displacement, and model year meet the compatibility requirements before placing your order.

【JA65, JA55】
K-SPEED CT04J K-SPEED Headlight Cover Horizontal For Honda CT125 (Trail125)★Easy to install; suitable for beginners

【About Installation】
Easy to install. Even beginners can install it.

【Before Ordering】
Before placing your order, please confirm that your vehicle's model, displacement, and model year meet the compatibility requirements.

【JA65, JA55】
K-SPEED CT14J K-SPEED Steel Headlight Cover For Honda CT125 (Trail125) *Cannot be used in combination with the genuine Honda front rack. Recommended combinations with this part: CT19 Headlight Mount, CT38 Crash Bar, CT57 Air Filter Cover, CT00 Chain Cover, CT40 Center Carrier, CT39 Rear Carrier ★Easy to install; suitable for beginners.

【Installation】
Easy to install. Suitable for beginners.

【Before Ordering】
Please ensure that your vehicle's model, engine displacement, and model year meet the compatibility requirements before placing your order.

The K-SPEED CT012 is an exhaust system for the Honda CT125 (Trail125).

【Compatible Models】
・Honda CT125 (Trail125)

【Product Features】
・Custom part from the Diabolus series
K-SPEED CT12K-SPEED Exhaust Black Tip For Honda CT125 (Trail125) This product is available as part of the Honda CT125 (Trail125) Cool & Smart Set: 3,800 JPY off, limited to 2 sets!

【Installation】
Tools such as screws and a screwdriver are required. Installation is intended for intermediate-level users.

【Before Ordering】
Please ensure that your vehicle's model, displacement, and year match the compatibility requirements before placing your order.

The K-SPEED CT079J is a seat designed for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
(JA65, JA55) K-SPEED CT79J seat square pattern For Honda CT125 (Trail125) Diabolus. Caution: High-strength screws are used. Please do not overtighten during installation, as this may cause damage. Install using a torque wrench set to 22Nm or less. For any reason, screw breakage or scratches during installation are not covered under warranty. Please be aware of this before purchasing.

【Installation】
Easy to install. Suitable for beginners.

【Before Ordering】
Please verify that your vehicle's model, displacement, and year meet the compatibility requirements before placing your order.

The K-SPEED CT058J is a seat designed for the Honda CT125 (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 (Trail125) (JA65, JA55)

【Product Features】
・Custom parts from the Diabolus series
(JA65, JA55) K-SPEED CT58J K-SPEED Seat Super Slim For Honda CT125 (Trail125) Approximately 20mm lower than the stock seat. Note: The screws provided have sufficient strength. Applying excessive force during installation may cause breakage. Please install using a torque wrench set to 22nm or less. For any reason, screw breakage or scratches during installation are not covered by the warranty. Please acknowledge this before purchasing.

【Regarding Installation】
Easy to install. Beginners can also perform the installation.

【Before Ordering】
Before placing your order, please confirm that your vehicle's model, displacement, and year match the compatibility requirements.

The K-SPEED CT099J is a seat designed for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom parts from the Diabolus series
(JA65, JA55) K-SPEED CT99J black & gray seat For Honda CT125 (Trail125) (JA65, JA55) Diabolus. Note: The screws used are of sufficient strength. Applying excessive force during installation may cause damage. Please tighten to 22Nm or less using a torque wrench. Screws that break or scratches caused during installation are not covered under warranty for any reason. Please understand this before purchasing.

【Installation】
Easy to install. Even beginners can perform the installation.

【Before Ordering】
Before placing an order, please confirm that your vehicle's model, displacement, and year match the compatibility requirements.

The K-SPEED CT090J is a seat designed for the Honda CT125 Hunter Cub (Trail125) (JA65, JA55).

【Compatible Models】
・Honda CT125 Hunter Cub (Trail125) (JA65, JA55)

【Product Features】
・Custom part from the Diabolus series
K-SPEED Seat (Diamond Stripes) Embroidered letters on the back for Honda CT125 (Trail125) (JA65, JA55) Note: We use high-strength screws. Please do not overtighten during installation, as this may cause damage. Install using a torque wrench at no more than 22Nm. For any reason, broken screws or scratches caused during installation are not covered by the warranty. Please acknowledge this before purchasing.

【Installation】
Easy to install. Suitable for beginners.

【Before Ordering】
Before placing your order, please ensure that your vehicle's model, engine displacement, and model year meet the compatibility requirements.