K-SPEED (Official Web site K-SPEED Japan )

K-SPEED RB0030
K-SPEED Dual Exhaust Long For Honda Rebel (CMX) 500
2017+
For the Honda Rebel 500 (CMX500), from its initial release in 2017 up to the current model, there have been no changes in the pipe diameter (size) of the exhaust pipe itself across different model years.
**Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED RB0087J
K-SPEED Tank Cover For Honda Rebel (CMX) 250, 300 & 500

 

Recommended in combination with this part:
RB0089 Side Cover
RB0084 Under Cowl
RB0163 Radiator Cover

★Easy to install - even for beginners

K-SPEED RB0014J
K-SPEED Tail Light For Honda Rebel (CMX) 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
ALL Model

★★★It is safer to ask an advanced user or an engineer.

Product wiring mode:
1. Black wire connects to cathode
2. White wire connects to taillight
3. Red wire connects to brake light
4. Green wire connects to left turn signal
5. Yellow wire connects to right turn signal

A separate turn signal LED relay is required.

Recommended IC Turn Signal Relays

• POSH Faith: Wide Watt Turn Signal Relay This is the most recommended manufacturer. They offer coupler-on types specifically designed for Honda vehicles, allowing for secure installation without modifying the genuine harness.

• DAYTONA: LED Compatible Turn Signal Relay This product has a proven track record of being used in many custom vehicles and is highly regarded for its stable operation. It can maintain accurate flashing cycles without losing original functions like hazard lights.

Recommended
Products purchased together
Turn signals, license plate brackets

K-SPEED RB0010e [Compatible with 2025 E-Clutch models]

*The aluminum heat-resistant sheet on the inside of the cover will deteriorate over time due to heat. If the surface is burned or shows signs of deterioration or damage, please replace it with a commercially available heat-resistant sheet and repair it.

Rebel 500/500S
2017,2019,2020,2023,2024,2025

K-SPEED Fairing Under Cowl (Pan Panel) For Honda Rebel (CMX) 500

This product cannot be used with the Rebel 1100.


★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED RB0084e
 [E-Clutch 2025 Model Compatible]
K-SPEED Fairing Under Cowl (Pan Panel) For Honda Rebel (CMX)500
Rebel 500/500S 2016+　
This part is for Rebel 500cc.

*The aluminum heat-resistant sheet inside the cover will deteriorate over time due to heat. If the surface is burned, deteriorated, or damaged, please repair it by replacing it with a commercially available heat-resistant sheet.Recommended combinations with this part:

RB0087 Tank Cover　
RB0089 Side Cover
RB0163 Radiator Cover
RB0086 Tail Light

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED RB0176J
K-SPEED Back Reinforced Seat For Honda Rebel (CMX) 250, 300 & 500

★Easy to install, even for beginners
Compatible with all model years

News

K-SPEED RB0198e undercowl for Honda Rebel (CMX) 250/300 E-Clutch 2025 Diabolus
 [Compatible with E-Clutch 2025 models] 8BK-MC49
Undercowl

Recommended combination with this part: RB0039 
**Screws, screwdrivers, etc. are required. For intermediate users.

 

We are offering a great deal on a popular 3-item set.

	2025-	-2024
Handlebar	RB0203	RB0027
Handle Grips	RB0202	RB0037
Bar End Mirror	RB0097	RB0097

Sale Price: 10% off

K-SPEED CT44J
K-SPEED Seat With Lattice Pattern For Honda CT125 (Trail125) (JA65, JA55)
Approximately 20mm lower than the genuine seat.

This is a firm, ultra-thin seat designed for better foot reach. The front part is narrowed to improve foot reach.

★Easy to install - even for beginners

The model number of this product has changed. (Old CT-JP8)

Note
The screws used are of sufficient strength.
If too much force is applied during installation, it will break.
Please install with a torque wrench at 22nm or less.
Screw breakage or damage during installation will not be covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED CT73 (JA65, JA55)
K-SPEED Rear Carrier Rack with original toolbox For Honda CT125 (Trail125)
This is an improved version of the CT17 with an added stay that allows you to attach the stock toolbox.

Recommended combination with this part: CT57 Air Filter Cover

★★Screws, screwdrivers, etc. are required. For intermediate users.

Compatible Passenger Seats
K-SPEED CT74 PASSENGER SEAT (DIAMOND PATTERN)
https://k-speed.com/collections/rear/products/ct74
K-SPEED CT75 PASSENGER SEAT (SQUARE PATTERN)
https://k-speed.com/collections/rear/products/ct75
K-SPEED CT76 PASSENGER SEAT (STRAIGHT PATTERN)
https://k-speed.com/collections/rear/products/ct76

K-SPEED CT94

K-SPEED Tank-shaped Case & Center Carrier Set for Honda CT125 (Trail125)

Recommended combination with this part: This part can also be installed on the genuine seat, but in that case, it will not look like the photo. We recommend K-SPEED seats.
When refueling, remove the dummy tank.

★★Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED CT114J Big Headlight cover wind shield for Honda CT 125 Diabolus

 

★Easy to install, even for beginners

K-SPEED DX071J Seat for Honda DAX125 (ST125 DAX) Diabolus

Note:
We use screws with sufficient strength.
Applying too much force during installation will cause damage.
Please install with a torque wrench at 22 Nm or less.
Screw breakage or damage during installation is not covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED DX058J
K-SPEED DX058J Exhaust Short Style Honda DAX125 (ST125 DAX) Diabolus

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED DX084 Full System Bazooga
For Honda DAX125 (ST125 DAX) Diabolus

K-SPEED DX091
K-SPEED DX091J CNC Super Mini black handlebar end mirror aluminum work, blue light-blocking glass lens, width 45 mm for Honda Dax 125 Diabolus

★Easy to install - even for beginners

K-SPEED GT63
Thunder J13B (Slip-on) Exhaust For Royal Enfield GT650 & Interceptor650 Diabolus

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED HT-SSF Cafe Seat & Subframe for Royal Enfield Hunter 350

Recommended
Items often purchased together
Tail lights, turn signals, license plate brackets

K-SPEED GT01
K-SPEED Side Mirror For Royal Enfield GT 650 & Interceptor 650
Left and right set
★★Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED GT47
K-SPEED Handlebar 41mm For Royal Enfield GT 650 & Interceptor 650

size 41 mm

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED KE06 Front Light Cover for Kawasaki Eliminator 400/450/500 year 2023-
Diabolus

★★Requires screws, screwdrivers, etc. Intended for intermediate users.

K-Speed KE04 custom seat for Kawasaki Eliminator 400/450/500 
Eliminator Seat

★★Requires screws, screwdriver, etc. Intended for intermediate users.
CAUTION
Screws with sufficient strength are used.
Applying too much force during installation will cause damage.
Install with a torque wrench at 22nm or less.
Screw breakage or damage during installation is not covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED RS03 Custom Seat For KAWASAKI Z900RS Diabolus

**Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED KE00 Exhaust Slip-on for Kawasaki Eliminator 400/450/500 year 2023-

**Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL34J Retro Scrambler Slip on exhaust for Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL08 Headlight Cover For Honda CL250, 300 & 500

★Easy to install - even for beginners

K-SPEED CL28 Super Black Slip-on Exhaust For Honda CL 500
J-spec with reduced sound volume

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL12 Front Fender (high-rise) For Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.
Products made from ABS plastic

K-SPEED SX19 Seat (mixed styles) for Triumph Speed400 & Scrambler 400X Diabolus
The seat is approximately 2cm thinner than the original seat.
This may vary depending on weight distribution and individual seat variations.

K-SPEED SX14 Tail Tidy with LED license plate light for Triumph Scrambler 400x/400xc & Speed400 Diabolus

K-SPEED 1P056 mixed pattern for Triumph Bobber Diabolus

★Easy to install - even for beginners

K-SPEED SX09 Crash Bars for Triumph Scrambler 400 & Speed 400 Diabolus

K-SPEED HM042 Super Low Seat for Honda Monkey125 Diabolus

K-SPEED HM037J-BLACK Big Headlight cover wind shield for Honda Monkey 125 Diabolus

 

★Easy to install - even for beginners

K-SPEED HM018 Headlight Cover For Honda Monkey125

K-SPEED HM026 Seat (Square pattern) for Honda Monkey 125

K-SPEED GB01 seat for Honda GB350S (only) Diabolus

*GB350S only

K-SPEED GB03 Brake and Clutch Lever Set for Honda GB350,GB350S,GB350C Diabolus

K-SPEED GB013 seat for Honda GB350C Diabolus
GB350      ×
GB350C 　 ○
GB350S　　×

K-SPEED GB018 seat for Honda GB350 Diabolus
GB350 (only)

GB350 ○
GB350C ×
GB350S ×

K-SPEED YAMAHA PG-1 Rock Scrambler
This product is available for pre-order.

*Important Request
For those considering or wishing to purchase this complete vehicle,
please contact us via the inquiry form.
We would like to explain the stock status, shipping details, various expenses at dealerships, payment methods, etc., before proceeding.

*Please note:
If you are considering or wish to purchase this complete vehicle, please contact us via the inquiry form.
We would like to explain the stock status, shipping details, various expenses at the dealership, payment methods, etc., before proceeding.

*This vehicle does not have a handlebar lock.
Please take measures such as a chain lock when parking.

Inquiry Form

K-SPEED quickly presents a full custom of the popular Honda DAX125 (ST125 DAX).
Introducing "DAXSTER", a brand new custom based on the Honda DAX125 (ST125 DAX)!!
The overall vehicle is lowered, and the classic DAX custom has been given a modern twist.
The exhaust pipe with beautiful curves, the long swing arm, and the handlebars all have a clean finish, typical of K-SPEED.

*The ABS has been removed for the custom specification. Due to this, the indicator light on the meter may remain on.

*Please be sure to read the "Notes" before purchasing.

■About the displayed price for Full Custom (Complete Build-Up)　

	Full Custom
Included in displayed price	Shipping (shipping to dealership)
Not included in displayed price	Compulsory automobile liability insurance
	Optional costs Oil Battery Consumption tax Miscellaneous expenses set by the dealership

 

• For Honda DAX125 (ST125 DAX), we will issue a sales certificate, so please obtain the license plate yourself from the relevant government office. For countries other than Japan, please obtain and register the license plate yourself for all vehicle types in accordance with the laws of each country.
• For countries other than Japan, additional costs may be incurred due to the laws and regulations of each country. Please inquire.
• For consultations regarding the installation of optional parts and estimates of the total cost, please inquire. Please note that in countries other than Japan, it may not be possible to install optional parts due to the laws and regulations of each country.
  
  Miscellaneous expenses mainly include oil and battery costs, maintenance costs (inspection of safety parts, brakes, engine, etc.), and costs set by each dealership.

*Specifications are subject to change without notice from the photos.
Please be aware in advance.
The mirrors shown in the second image will be installed.

*Please Note
If you are considering or wishing to purchase this complete vehicle,
please contact us via the inquiry form.
We would like to explain the stock status, shipping, miscellaneous expenses at the dealer, payment methods, etc., and then proceed with your order.

Inquiry Form

Introducing "Puppy Racer," a brand new custom based on the HONDA DAX125!!
It features the beautiful finish characteristic of K-SPEED.
*ABS has been removed for the custom specification. Due to this, the lamp in the meter may not turn off.

*Please be sure to read "Notes" before purchasing.

■About the listed price for Full Custom (Complete Build-Up)　

	Full Custom
Included in listed price	Shipping (shipping to dealer)
Not included in listed price	Compulsory automobile liability insurance
	Optional expenses Oil Battery Consumption tax Miscellaneous expenses set by the dealer

 

• *1 For Dax125 license plates, we will issue a sales certificate, so please obtain it yourself at your local government office. For countries other than Japan, please obtain and register your license plate for all vehicle types in accordance with the laws of each country.
• *2 In countries other than Japan, additional costs may be incurred due to the laws and regulations of each country. Please contact us.
• *3 For consultations regarding the installation of optional parts and estimates of the total cost, please contact us. Please note that in countries other than Japan, it may not be possible to install optional parts due to the laws and regulations of each country.

※Please be aware that specifications may be changed without notice from the photos.

The mirror in the 5th photo will be installed.