K-SPEED (Official Web site K-SPEED Japan )

K-SPEED RB0087J
K-SPEED Tank Cover For Honda Rebel (CMX) 250, 300 & 500

 

Recommended in combination with this part:
RB0089 Side Cover
RB0084 Under Cowl
RB0163 Radiator Cover

★Easy to install - even for beginners

K-SPEED RB0014J
K-SPEED Tail Light For Honda Rebel (CMX) 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
ALL Model

★★★It is safer to ask an advanced user or an engineer.

Product wiring mode:
1. Black wire connects to cathode
2. White wire connects to taillight
3. Red wire connects to brake light
4. Green wire connects to left turn signal
5. Yellow wire connects to right turn signal

A separate turn signal LED relay is required.

Recommended IC Turn Signal Relays

• POSH Faith: Wide Watt Turn Signal Relay This is the most recommended manufacturer. They offer coupler-on types specifically designed for Honda vehicles, allowing for secure installation without modifying the genuine harness.

• DAYTONA: LED Compatible Turn Signal Relay This product has a proven track record of being used in many custom vehicles and is highly regarded for its stable operation. It can maintain accurate flashing cycles without losing original functions like hazard lights.

Recommended
Products purchased together
Turn signals, license plate brackets

K-SPEED RB0016J
K-SPEED Front Fender For Honda Rebel (CMX) 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
2017,2019,2020,2023

★★★It is safer to ask an experienced person or engineer.

K-SPEED RB0010e [Compatible with 2025 E-Clutch models]

*The aluminum heat-resistant sheet on the inside of the cover will deteriorate over time due to heat. If the surface is burned or shows signs of deterioration or damage, please replace it with a commercially available heat-resistant sheet and repair it.

Rebel 500/500S
2017,2019,2020,2023,2024,2025

K-SPEED Fairing Under Cowl (Pan Panel) For Honda Rebel (CMX) 500

This product cannot be used with the Rebel 1100.


★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED RB0198e undercowl for Honda Rebel (CMX) 250/300 E-Clutch 2025 Diabolus
 [Compatible with E-Clutch 2025 models] 8BK-MC49
Undercowl

Recommended combination with this part: RB0039 
**Screws, screwdrivers, etc. are required. For intermediate users.

 

K-SPEED RB0176J
K-SPEED Back Reinforced Seat For Honda Rebel (CMX) 250, 300 & 500

★Easy to install, even for beginners
Compatible with all model years

News

K-SPEED RB0197J seat for Rebel 250/300 & 500 Diabolus year 2017 - 2025

Compatible with all model years
★Easy to install - even for beginners

K-SPEED RB0051J
K-SPEED Tank Cover For Honda Rebel (CMX) 250, 300 & 500

★Easy to install - even for beginners

K-SPEED CL34J Retro Scrambler Slip on exhaust for Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL12 Front Fender (high-rise) For Honda CL250, 300 & 500

★★Screws, screwdrivers, etc. are required. For intermediate users.
Products made from ABS plastic

K-SPEED CL29 Crash Bars for Honda CL500

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED CL23 Wheel Frame Sliders for Honda CL 500

★Easy to install - even for beginners

K-SPEED CT73 (JA65, JA55)
K-SPEED Rear Carrier Rack with original toolbox For Honda CT125 (Trail125)
This is an improved version of the CT17 with an added stay that allows you to attach the stock toolbox.

Recommended combination with this part: CT57 Air Filter Cover

★★Screws, screwdrivers, etc. are required. For intermediate users.

Compatible Passenger Seats
K-SPEED CT74 PASSENGER SEAT (DIAMOND PATTERN)
https://k-speed.com/collections/rear/products/ct74
K-SPEED CT75 PASSENGER SEAT (SQUARE PATTERN)
https://k-speed.com/collections/rear/products/ct75
K-SPEED CT76 PASSENGER SEAT (STRAIGHT PATTERN)
https://k-speed.com/collections/rear/products/ct76

K-SPEED CT94

K-SPEED Tank-shaped Case & Center Carrier Set for Honda CT125 (Trail125)

Recommended combination with this part: This part can also be installed on the genuine seat, but in that case, it will not look like the photo. We recommend K-SPEED seats.
When refueling, remove the dummy tank.

★★Screws, screwdriver, etc. are required. For intermediate users.

K-SPEED CT85J
K-SPEED Seat Red For Honda CT125 (Trail125) (JA65, JA55)

★Easy to install - even for beginners

 

Note
The screws used are of sufficient strength.
If too much force is applied during installation, it will break.
Install with a torque wrench at 22nm or less.
Broken screws or damage during installation for any reason are not covered by warranty.
Please purchase with this understanding.

K-SPEED CT113J (JA55 JA65)
K-SPEED Crash Bars For Honda CT125 (Trail125)

Recommended combinations with this part:
K-SPEED CT14 Headlight Cover,
K-SPEED CT57 Air Filter Cover,
K-SPEED CT00 Chain Cover,
K-SPEED CT40 Center Carrier,
K-SPEED CT39 Rear Carrier

★★ Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED DX001
K-SPEED Headlight Cover With Horizontal Pattern For Honda DAX125 (ST125 DAX)

★Easy to install - even for beginners

K-SPEED DX005J
K-SPEED Seat With Horizontal Decoration For Honda DAX125 (ST125 DAX)

Installation is smooth and requires no modifications.
While the product is waterproofed, it does have seams. If perfect waterproofing is desired, please seam seal the stitching or use a waterproof cover.

★Easy to install - even for beginners

Caution
The screws used have sufficient strength.
Applying too much force during installation will cause damage.
Please install with a torque wrench at 22nm or less.
Screw breakage or damage during installation will not be covered under warranty for any reason.
Please purchase with this understanding.

K-SPEED DX006J
K-SPEED Seat Super Low With Square Pattern For Honda DAX125 (ST125 DAX)

No processing is required; it can be installed smoothly.
Although it is waterproof, it has seams, so if you desire perfect waterproofing, please apply seam sealant to the seams or use a waterproof cover.

★Easy to install - even for beginners

Caution
We use screws with sufficient strength.
Applying too much force during installation will cause damage.
Please install with a torque wrench set to 22nm or less.
For any reason, screw breakage or scratches during installation are not covered by the warranty.
Please understand this before purchasing.

K-SPEED DX007
K-SPEED Classic Wind Shield For Honda DAX125 (ST125 DAX)

★★Requires screws, screwdrivers, etc. For intermediate users

K-SPEED SX12 silver color Scrambler style for Triumph Scrambler 400X Diabolus

Diabolus Full System exhaust pipe silver color Scrambler style for Triumph Scrambler 400X
(For 1-hole O2 sensor)

K-SPEED SX19 Seat (mixed styles) for Triumph Speed400 & Scrambler 400X Diabolus
The seat is approximately 2cm thinner than the original seat.
This may vary depending on weight distribution and individual seat variations.

K-SPEED SX14 Tail Tidy with LED license plate light for Triumph Scrambler 400x/400xc & Speed400 Diabolus

K-SPEED SX09 Crash Bars for Triumph Scrambler 400 & Speed 400 Diabolus

K-SPEED GT02
K-SPEED Exhaust For Royal Enfield GT650 & Interceptor650

Cannot be used with the stock compact engine guard.

★★Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED GT16
K-SPEED Side Pocket Cover For Royal Enfield GT650 & Interceptor650

★Easy to install - even for beginners

K-SPEED GT56
K-SPEED Seat Short Café Racer For Royal Enfield GT650 & Interceptor650
approx. 61cm X 25cm
★Easy to install - even for beginners

News

K-SPEED HT-SSF Cafe Seat & Subframe for Royal Enfield Hunter 350

Recommended
Items often purchased together
Tail lights, turn signals, license plate brackets

K-SPEED RS03 Custom Seat For KAWASAKI Z900RS Diabolus

**Screws, screwdrivers, etc. are required. For intermediate users.

K-SPEED KE05 Front Light Cover Set for Kawasaki Eliminator 400/450/500 year 2023- Diabolus

★★Requires screws, screwdriver, etc. For intermediate users.

K-Speed KE04 custom seat for Kawasaki Eliminator 400/450/500 
Eliminator Seat

★★Requires screws, screwdriver, etc. Intended for intermediate users.
CAUTION
Screws with sufficient strength are used.
Applying too much force during installation will cause damage.
Install with a torque wrench at 22nm or less.
Screw breakage or damage during installation is not covered by warranty for any reason.
Please purchase with this understanding.

K-SPEED KE06 Front Light Cover for Kawasaki Eliminator 400/450/500 year 2023-
Diabolus

★★Requires screws, screwdrivers, etc. Intended for intermediate users.

K-SPEED HM042 Super Low Seat for Honda Monkey125 Diabolus

K-SPEED HM037J-BLACK Big Headlight cover wind shield for Honda Monkey 125 Diabolus

 

★Easy to install - even for beginners

K-SPEED HM023 Iron Wheel Cover for Honda Monkey 125

Wheel Cover for Honda Monkey 125
(for models without ABS only)

K-SPEED DX018
K-SPEED Steel Headlight Cover For Honda DAX125 (ST125 DAX) Monkey125 

★Easy to install – even for beginners

K-SPEED GB020 Custom seat for Honda GB350 (Only) Diabolus

GB350      ○
GB350C 　 ×
GB350S　　×

K-SPEED GB019 brown seat for Honda GB350C Diabolus

GB350      ×
GB350C    ○
GB350S　　×

K-SPEED GB018 seat for Honda GB350 Diabolus
GB350 (only)

GB350 ○
GB350C ×
GB350S ×

K-SPEED GB01 seat for Honda GB350S (only) Diabolus

*GB350S only

K-SPEED YAMAHA PG-1 Rock Scrambler
This product is available for pre-order.

*Important Request
For those considering or wishing to purchase this complete vehicle,
please contact us via the inquiry form.
We would like to explain the stock status, shipping details, various expenses at dealerships, payment methods, etc., before proceeding.

*Please note:
If you are considering or wish to purchase this complete vehicle, please contact us via the inquiry form.
We would like to explain the stock status, shipping details, various expenses at the dealership, payment methods, etc., before proceeding.

*This vehicle does not have a handlebar lock.
Please take measures such as a chain lock when parking.

Inquiry Form

K-SPEED quickly presents a full custom of the popular Honda DAX125 (ST125 DAX).
Introducing "DAXSTER", a brand new custom based on the Honda DAX125 (ST125 DAX)!!
The overall vehicle is lowered, and the classic DAX custom has been given a modern twist.
The exhaust pipe with beautiful curves, the long swing arm, and the handlebars all have a clean finish, typical of K-SPEED.

*The ABS has been removed for the custom specification. Due to this, the indicator light on the meter may remain on.

*Please be sure to read the "Notes" before purchasing.

■About the displayed price for Full Custom (Complete Build-Up)　

	Full Custom
Included in displayed price	Shipping (shipping to dealership)
Not included in displayed price	Compulsory automobile liability insurance
	Optional costs Oil Battery Consumption tax Miscellaneous expenses set by the dealership

 

• For Honda DAX125 (ST125 DAX), we will issue a sales certificate, so please obtain the license plate yourself from the relevant government office. For countries other than Japan, please obtain and register the license plate yourself for all vehicle types in accordance with the laws of each country.
• For countries other than Japan, additional costs may be incurred due to the laws and regulations of each country. Please inquire.
• For consultations regarding the installation of optional parts and estimates of the total cost, please inquire. Please note that in countries other than Japan, it may not be possible to install optional parts due to the laws and regulations of each country.
  
  Miscellaneous expenses mainly include oil and battery costs, maintenance costs (inspection of safety parts, brakes, engine, etc.), and costs set by each dealership.

*Specifications are subject to change without notice from the photos.
Please be aware in advance.
The mirrors shown in the second image will be installed.

*Please Note
If you are considering or wishing to purchase this complete vehicle,
please contact us via the inquiry form.
We would like to explain the stock status, shipping, miscellaneous expenses at the dealer, payment methods, etc., and then proceed with your order.

Inquiry Form

Introducing "Puppy Racer," a brand new custom based on the HONDA DAX125!!
It features the beautiful finish characteristic of K-SPEED.
*ABS has been removed for the custom specification. Due to this, the lamp in the meter may not turn off.

*Please be sure to read "Notes" before purchasing.

■About the listed price for Full Custom (Complete Build-Up)　

	Full Custom
Included in listed price	Shipping (shipping to dealer)
Not included in listed price	Compulsory automobile liability insurance
	Optional expenses Oil Battery Consumption tax Miscellaneous expenses set by the dealer

 

• *1 For Dax125 license plates, we will issue a sales certificate, so please obtain it yourself at your local government office. For countries other than Japan, please obtain and register your license plate for all vehicle types in accordance with the laws of each country.
• *2 In countries other than Japan, additional costs may be incurred due to the laws and regulations of each country. Please contact us.
• *3 For consultations regarding the installation of optional parts and estimates of the total cost, please contact us. Please note that in countries other than Japan, it may not be possible to install optional parts due to the laws and regulations of each country.

※Please be aware that specifications may be changed without notice from the photos.

The mirror in the 5th photo will be installed.