Products

K-SPEED-ME02
K-SPEED Rubber Front Fork Cover Diablo For Royal Enfield Meteor350

★★★ It is safer to ask a senior/engineer for help.

How much in USD, Euro, GBP & AUD?

K-SPEED-PG01J Full System pipe for Yamaha PG-1 Diabolus

This product is painted with ceramic heat-resistant paint (heat resistant 700°C) on the main body.
Please be aware that there are cases of illegally modified products, copied products, parallel sales products, etc. that are painted with inferior paint and sold.
There are products on the market that use modified products as K-SPEED's trademark without permission.
Please be careful.
Products other than K-SPEED JAPAN authorized products are out of warranty.

Screws, screwdrivers, etc. are required. For intermediate level users.

K-SPEED PG02 Bazooka Full System Exhaust for Yamaha PG-1 Diabolus

The main body of this product is painted with ceramic heat-resistant paint (heat resistant up to 700 degrees).
Please be aware that there are cases where illegally modified products, counterfeit products, and parallel sales products are painted with inferior paint and sold.

Products other than genuine K-SPEED JAPAN products are not covered by the warranty.

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED RB0002J-Black
K-SPEED Brake Lever Black / Chrome For HONDA Rebel 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
2017, 2019, 2020, 2023
Note: Not compatible with 2025 models

 Brake and clutch lever

★★★It is safer to ask an advanced technician or engineer.

Please note that the suspension will be shipped by sea, so it will take approximately one month to Japan and Europe, and three months to the United States.

K-SPEED RB0006
YSS Rear Shock Absorbers Black For HONDA Rebel 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
2017, 2019, 2020, 2023

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED-RB0010e
[Compatible with E-Clutch 2025 model]

*The heat-resistant sheet inside the cover deteriorates over time due to heat. When the surface is burnt, deteriorated or damaged, replace and repair it with a commercially available heat-resistant sheet.

Rebel 500/500S
2017,2019,2020,2023,2024,2025

K-SPEED Fairing Under Cowl For HONDA Rebel 500

This product cannot be used with the Rebel 1100.

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED-RB0011 License Plate Universal Parts

Holes in the plate must be drilled to match the license plate number for each country.

< For Intermediate >

K-SPEED-RB0012

K-SPEED Chain Cover For HONDA CMX/Rebel 250, 300 & 500

< For Intermediate >

K-SPEED-RB0013

K-SPEED Fairing Side Pocket Cover For HONDA Rebel 250, 300 & 500
ALL MODEL

This product cannot be used with the Rebel 1100.
< For Beginners >

K-SPEED RB0014J
K-SPEED Tail Light For HONDA Rebel 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
ALL Model

★★★It is safer to ask an advanced technician or engineer.

Product wiring mode:
1. Black wire connects to cathode
2. White wire connects to tail light
3. Red wire connects to brake light
4. Green wire connects to left turn signal
5. Yellow wire connects to right turn signal

A separate turn signal LED relay is required.

Recommended items purchased together: Turn signals, license plate brackets

K-SPEED-RB0016

K-SPEED Front Fender For HONDA CMX/Rebel 250, 300 & 500

< For Advanced Engineers >

K-SPEED-RB0017

K-SPEED Rubber Front Fork Cover For HONDA Rebel 250, 300 & 500

K-SPEED-RB0026 is required to use this part.

< For Advanced Engineers >

K-SPEED RB0018
K-SPEED Footrests For HONDA Rebel 250, 300 & 500

Rebel 250/250S, 300/300S & 500/500S
2017, 2019, 2020, 2023
Not compatible with 2025 models

★Easy to install, even for beginners

K-SPEED-RB0019

K-SPEED LED Tail Light For HONDA Rebel 250, 300 & 500

< For Advanced Engineers >

K-SPEED-RB0021

K-SPEED Front Suspension Cover For HONDA Rebel 250, 300 & 500

It is used when the normal turn signal is removed.

When using a normal turn signal, please use K-SPEED-RB0118.

< For Advanced Engineers >

K-SPEED-RB0024

K-SPEED Engine Cover Right Side HONDA Rebel 500

< For Beginners >

K-SPEED-RB0025

K-SPEED Seat Diablo With Diamond Pattern For HONDA Rebel 250, 300 & 500

Fits all years
< For Beginners >

K-SPEED-RB0026

K-SPEED Front Absorber Balance For HONDA Rebel 250, 300 & 500

< For Advanced Engineers >
★★★★
Please ask your custom store. Machining modifications, specialized tools, and custom knowledge required.

K-SPEED RB0027J
K-SPEED Low-shaped Handlebar Aluminum Handlebar For HONDA Rebel 250, 300 & 500
The shape of this product is lower than the original.
Matte black aluminum, 70cm.

Rebel 250/250S, 300/300S & 500/500S
2017, 2019, 2020, 2023
Note: Not compatible with 2025 models

8BK-MC49, 2BK-MC49, 8BL-PC60, 2BL-PC60,

K-SPEED offers two handlebars that can be attached to the original mount. The inner diameter is 18mm.
There are holes on both ends so you can attach mirrors.

Remove the original levers, switch box, grips, and meter, and install the switch box by aligning it with the holes in the handlebars.

RB0027 Lowered Style

Recommended combination with this part: RB0097 mirror or AA112 mirror

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED-RB0029

K-SPEED Dual Exhaust Diablo Short For HONDA Rebel 500

< For Intermediate >

We do not provide exhaust blueprints as they are intellectual property. Please understand this before purchasing.

K-SPEED RB0030
K-SPEED Dual Exhaust Long For HONDA Rebel 500

★★Screws and a screwdriver are required. For intermediate users.

K-SPEED-RB0032

K-SPEED Exhaust Diablo Dark Thunder Slip On For HONDA Rebel 500

< For Intermediate >

We do not provide exhaust blueprints as they are intellectual property. Please understand this before purchasing.

K-SPEED RB0037
K-SPEED Handle Grips For HONDA Rebel 250, 300 & 500
Note: Not compatible with 2025 models

★Easy to install, even for beginners

K-SPEED-RB0038

K-SPEED Engine Cover For HONDA Rebel 500
This product cannot be used with the Rebel 1100.

< For Beginners >